European Robin “puzzle” V3 3D Printer Model
The file 'European Robin “puzzle” V3 3D Printer Model' is (stl) file type, size is 6.3MB.
The file 'European Robin “puzzle” V3 3D Printer Model' is (stl) file type, size is 6.3MB.
Thanks for the feedback (and the likes !)
V3 : 01 02 2023 update
New version with thicker walls for the face. It reduce the gap between the red part and the grey part.There are less fail during printing the eyes layers too.
I recommend to print the gray part with a 48° angle to have a very smooth surface (See last pictures), support will be necessary.
V2 : 13 01 2023 update
New version 2, with more clearance everywere, thicker walls, a lot cleaner .stl files and a "face" part with a manual support to avoid baseplate detachment. I still recommend to add a raft for this specific piece.
There is no longer fixing system for the face (like the V1) and the body, glue may be required.
I wanted to print this bird in color, just for fun and because my printer has only one nozzle it became a puzzle..
There are no supports needed but a raft is necessary for the "face".
Sorry, the meshes are very messy this time, it was quite challenging to obtain something with 3 main parts only.
I recommend to print it with 0.1mm layers, especially for the "face" file.
Don't forget to share your result and like this post if you are happy with your bird :)
Selling printed birds using these files is not allowed ;)
My other birds :
| V2_robin_beak_n2.stl | 856.1KB | |
| V2_robin_body_n11.stl | 1.4MB | |
| V2_robin_eyes_n2.stl | 169.4KB | |
| V2_robin_face_n10.stl | 2.3MB | |
| V2_robin_wings_and_tail_n11.stl | 2.9MB | |
| V3_robin_face.stl | 2.3MB | |
| V3_robin_wings_and_tail_48degree.stl | 2.9MB |
