Euro Banknote Holder 3D Printer Model
The file 'Euro Banknote Holder 3D Printer Model' is (stl) file type, size is 1.9KB.
The file 'Euro Banknote Holder 3D Printer Model' is (stl) file type, size is 1.9KB.
Hi this is my first ever finished model that i created by my own, it is a simple thing but i didnt find it on this site, so i decided to try to make one by my own. I had another idea in mind: this model is 80mm high all across the model with the bottom parts a little higher , i wanted to create it with flat bottom part and the top part cut diagonally to go from 60mm in the 5euro to 80mm to the 100euro. If you want feel free to create it, you can make it like a remix of this or just add the link of this model in the bio of yours.
Extimated time on cura on 0.6mm is about 6 hours with 15% infill (make sure that you lay it flat and try to rotate it and you can save some time). Actually it took me little more than 7 hours and it wasn't very good.
The print i have got is not the best, 0.6 is pretty bad as resolution especially the parts inside, i recomend at least 0.4 resolution and scale it like 105% maybe but you can actually use it even in 100%.
The euro3 file is a better one and can save a little bit of time because it is like a "stair".
STR
| euro.stl | 4.6KB | |
| euro3.stl | 6.1KB |
