EUC Stand 3D Printer Model
The file 'EUC Stand 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'EUC Stand 3D Printer Model' is (stl) file type, size is 1.2MB.
A simple stand for Electric Unicycles, inspired by EUCGUY.
Print two Side and two Base pieces. The EUC_Stand_xx.stl versions are intended to be more universal, while named versions, such as the KS16S_Stand_xx.stl. Choose the base width that goes with your EUC. 19cm version is about the same width as the original stand from EUCGUY, and 18cm and 16cm versions of course are narrower for narrower wheels. 20.3cm version for wider wheels like the KS16X. (Width is measured to the width of the full stand, including side pieces.)
Currently only tested with my only wheel, the KS16S. The design can easily be tweaked to fit other sizes - if you have a known width and height for your EUC and want a special version, leave a comment, and I'll generate that for you when I have time.
Needs:
4x 1/4-20 countersunk bolts
4x 1/4-20 nuts
If using locknuts, 1.25 inch long bolts would be best. You can get away with regular nuts (with blue threadlocker!) and 1 inch bolts, too.
EDIT: Added wider 20.3cm base for wheels like KS16X.
EDIT2: Added another wider 21.2cm base for even more clearance for things like bodyguards.
| EUC_Stand_Base_16CM_VJP.stl | 403.9KB | |
| EUC_Stand_Base_18CM_VJP.stl | 370.0KB | |
| EUC_Stand_Base_19CM_VJP.stl | 356.8KB | |
| EUC_STAND_BASE_20CM3_VJP.stl | 310.9KB | |
| EUC_Stand_Base_21CM2_VJP.stl | 298.9KB | |
| EUC_Stand_Side_VJP.stl | 628.5KB | |
| KS16S_Stand_Base_VJP.stl | 404.3KB | |
| KS16S_Stand_Side_VJP.stl | 614.8KB |
