eteeTracker mount to mount to straps and quarter inch mounts.
You'll require 2 m3 screw and a quarter inch nut
For the m3 screw, you'll need to print at the lowest layer height possible. The tougher the material the better.
With softer PLAs (recycled, highspeed, etc) the screws may become single use or hard to remove once installing. If using printed screws, also use a printed nut as to avoid losing a metal one - those things are expensive!
| eteeselftaper_bottom.stl | 1.6MB | |
| eteeselftaper_top.stl | 5.7MB | |
| m3_screw.stl | 395.0KB |
