Updated! I found that both Cora & Prusa Slicers were creating artifacts for the lid stand offs when I went to print a set for a friend recently. This update fixes that. I have also broken out each individual part as requested in the old listing. Enjoy!
From Older Post:
This is a standard enclosure for the ETC #Lighthack. I came up with this a few years ago when it first came out because I didn't want to drill out and file down the edges for everything.
https://community.etcconnect.com/etclabs/f/lighthack/23742/what-is-lighthack
I've had a few friends ask for this file so I thought I would share with everyone else out there.
Enjoy!
| Lighthack_Bottom_v2024.stl | 2.0MB | |
| Lighthack_Encoder_Knob_1x_v2024.stl | 647.7KB | |
| Lighthack_Top_v2024.stl | 1.4MB | |
| Lighthack__Button_F_1x_v2024.stl | 794.8KB | |
| Lighthack__Button_N_1x_v2024.stl | 802.9KB | |
| Lighthack__Button_P_1x_v2024.stl | 855.8KB |
