ETB Industrial Building 5″ Tall Floor Sample From Damocles KS 3D Printer Model
The file 'ETB Industrial Building 5″ Tall Floor Sample From Damocles KS 3D Printer Model' is (stl) file type, size is 34.4MB.
The file 'ETB Industrial Building 5″ Tall Floor Sample From Damocles KS 3D Printer Model' is (stl) file type, size is 34.4MB.
A sample ruin from Damocles kickstarter.
In order to make ETB system more playable with 40k new rules I added 5" tall wall and pillar for the pacth of july.
With these files you will be able to build 6x6x8" industrial building.
Flatbed printing for the walls save time and improve quality.
Join the campain for 10000+ stl files.
https://www.kickstarter.com/projects/alario/damocles-part-1-modular-industrial-buildings-for-wargaming?
https://www.myminifactory.com/users/Tales%20of%20Damocles?show=campaigns
Free manual here:
https://drive.google.com/drive/folders/1Di20CerHtJwRTODCx9YC-K0VKAJ1sw_u?usp=sharing
PS:
Don't forget to take off the integrated support before mounting the building.
There is only one side walls, use revert mirror fonction in the slicer to get the other side.
You should have to "Union overlapping volumes" (in cura).
This set have compatible parts with others 3" samples from damocles.
Here is my last project:
https://www.kickstarter.com/projects/alario/theoutpost?
| 1d6_Wound_trackers_fukai_solid.stl | 32.7MB | |
| 3x3_Floor_fixed.stl | 36.4MB | |
| Angle_top_0x0.stl | 38.9KB | |
| facade_5_B_v4.stl | 11.1MB | |
| Floor_3x3_V04.stl | 1.3MB | |
| INDR_F1_W2_1_V04_v2.stl | 6.5MB | |
| INDR_F3_V06_Ruined_V05.stl | 1.4MB | |
| INDR_F3_V15_Ruined_V06.stl | 1.5MB | |
| Joint_5_strong.stl | 570.4KB | |
| Joint_5_strong_smaller.stl | 566.9KB | |
| Joint_strong_45mm.stl | 46.8KB | |
| Joint_strong_45mm_integrated_support.stl | 205.0KB | |
| Piliar_angle_5_inch.stl | 339.1KB | |
| Pillar.stl | 254.4KB | |
| Ruined_Fixation_3x3.stl | 663.2KB | |
| Ruined_Fixation_3x3_fixed.stl | 31.0MB | |
| Ruined_Ground_6.stl | 142.2KB | |
| tourillon.stl | 103.8KB |
