Estes Satellite And Reducer/Transition (P/N ?) 3D Printer Model
The file 'Estes Satellite And Reducer/Transition (P/N ?) 3D Printer Model' is (stl) file type, size is 2.2MB.
The file 'Estes Satellite And Reducer/Transition (P/N ?) 3D Printer Model' is (stl) file type, size is 2.2MB.
This is a the satellite and transition/reducer that was used in two Estes kits listed below. All measurements were taken from the part in an Estes Geo Sat LV kit.
Kit# Kit Name
1977 Geo Sat LV
2003 SDI Satellite
Files:
SINGLE PIECE
1-2) Original single-piece part and end cap that has a 4.0mm hole for mounting an eye bolt to attach a recovery system.
3) Solid single-piece version with built-in recovery system attachment holes.
TWO PIECES
4-7) Satellite and transition in separate pieces in solid form and hollow.
FOUR PIECES
7-10) Satellite is in three pieces and transition separate with both being solid.
11-12) Transitions that are guided and are hollow and solid.
13) Satellite is a single piece that is guided.
14-16) Satellite is in three separate pieces, solid, and guided.
I've designed the above files to give the person printing them full flexibility in printing what is easiest for them.
You can find the instructions on how to paint this object and the decals for it here.
https://www.spacemodeling.org/jimz/estes/est1977.pdf
https://www.spacemodeling.org/jimz/estes/yrp2003.pdf
There is an Ebay seller who makes and sells decals for Estes rocket kits. I have written to him and asked if he could make decals for the Geo Sat LV and seems interested. The name of the Ebay seller is CMR Products LLC. You can find his Ebay store page at
https://www.ebay.com/str/cmrproductsllc?_trksid=p4429486.m3561.l161211
Related files:
Estes PNC-60MX Nose Cone
https://www.thingiverse.com/thing:6771051
| Estes_GSLV_Satellite_and_Transition_Original.stl | 1001.1KB | |
| Estes_GSLV_Satellite_and_Transition_original_SOLID.stl | 1006.1KB | |
| Estes_GSLV_Satellite_Bottom.stl | 33.9KB | |
| Estes_GSLV_Satellite_Bottom_Guided.stl | 35.4KB | |
| Estes_GSLV_Satellite_Guided.stl | 609.7KB | |
| Estes_GSLV_Satellite_Middle.stl | 554.4KB | |
| Estes_GSLV_Satellite_Middle_Guided.stl | 555.9KB | |
| Estes_GSLV_Satellite_only_Hollow.stl | 795.4KB | |
| Estes_GSLV_Satellite_only_Solid.stl | 608.9KB | |
| Estes_GSLV_Satellite_Top.stl | 22.2KB | |
| Estes_GSLV_Satellite_Top_Guided.stl | 23.0KB | |
| Estes_GSLV_SatTrans_End_Cap.stl | 146.2KB | |
| Estes_GSLV_Transition_Hollow_Guided.stl | 209.3KB | |
| Estes_GSLV_Transition_only_Hollow.stl | 208.5KB | |
| Estes_GSLV_Transition_only_Solid.stl | 397.4KB | |
| Estes_GSLV_Transition_Solid_Guided.stl | 398.2KB |
