These are the plastic parts for the Estes GeoSat LV classic model rocket. The Satellite is broken up into three pieces for ease of printing. The nose cone is also included. The nose and tailcones for the twin boosters will be made available soon. I'm waiting for exact measurements to be made available. This is only the plastic parts to recreate the kit. Other things like paper tubes and balsa fins are needed.
Update 9/1/2014
I've added the parts for the booster nose cone and tail cone. The tail cone prints as two pieces and is assembled using a small piece of 1/2" wood dowel.
Update 9/5/2014
I've Tweaked the booster nose cone a bit based on comparisons with the original part. It's a tiny bit less blunt now.
| BoosterNose.stl | 481.1KB | |
| BoosterTail1.stl | 249.0KB | |
| BoosterTail2.stl | 152.8KB | |
| Estes.scad | 497.0B | |
| Estes_Geo_Sat_LV.scad | 12.6KB | |
| PNC60MX.stl | 563.0KB | |
| rocketry.scad | 6.6KB | |
| Satellite1.stl | 579.0KB | |
| Satellite3.stl | 147.4KB | |
| Sattelite2.stl | 1.8MB |
