Description Files (14)

Summary

ESPuino - „AlvaCase“

ESPuiono base: https://forum.espuino.de/

Size of the box: 11cm x 11cm x 11cm

1 x PN5180 Modul NFC / RFID

4 x M4x100mm head screws DIN 7985

1 x HW-040 Rotary encoder

1 x 24 Bits WS2812 5050 RGB LED Ring (outer max. Ø 87mm / min. inner Ø 71mm)
https://www.amazon.de/dp/B07DKJ6SFR?psc=1&ref=ppx_yo2ov_dt_b_product_details

1x Speaker- Visaton VS-FR7/4

4 x M4 threaded brass inserts for plastic parts (can be up to 10 mm long)

1 x LiFePO4 Rechargeable battery 3.2V 6000mAh
https://www.eremit.de

ESPuino:

The "HALTER" in the center is an exact fit and must be carefully massaged in with a hammer 😉. This helps to stabilise the entire housing.
Attach the LED cover last. You can't get it off again without destroying it!
The headphone board should be secured with a screw; the hole on the "HALTER" is intended for this purpose.
All cables must be routed through the openings - right and left - on the "HALTER", otherwise the top cover will not fit.
The USB-C connector that is connected to the ESP32 must be soldered by yourself. There is very little space there, I couldn't find a suitable solution that can be bought directly.
Files "ESPuino_AlvaCase_BUTTON_SYMBOL_PLAY-PAUSE.stl" and "ESPuino_AlvaCase_BUTTON_SYMBOL_REV-FOR.stl" are not required. I built the top cover and base out of wood and used these prints.

ESPuino_AlvaCase_BODEN.stl	57.9KB
ESPuino_AlvaCase_BODEN_04mm_kleiner.stl	59.3KB
ESPuino_AlvaCase_BUTTON_SYMBOL_PLAY-PAUSE.stl	22.7KB
ESPuino_AlvaCase_BUTTON_SYMBOL_REV-FOR.stl	15.9KB
ESPuino_AlvaCase_DECKEL.stl	199.9KB
ESPuino_AlvaCase_DECKEL_04mm_kleiner.stl	200.5KB
ESPuino_AlvaCase_GEHÄUSE.stl	459.2KB
ESPuino_AlvaCase_HALTERUNG.stl	41.7KB
ESPuino_AlvaCase_HW040-ABSTANDSHALTER.stl	12.0KB
ESPuino_AlvaCase_LAUTSPRECHER-ABDECKUNG.stl	504.6KB
ESPuino_AlvaCase_LAUTSPRECHER-HALTER.stl	31.7KB
ESPuino_AlvaCase_LAUTSTÄRKEREGLER.stl	164.1KB
ESPuino_AlvaCase_LED-RING_ABDECKUNG.stl	129.2KB
ESPuino_AlvaCase_RFID-HALTER.stl	21.2KB