I use this shelf every day. Holds my main espresso accessories. Best part is a quick spin & your 54mm distributer is clean & the old coffee grounds fall into your knock box.
There are 2 decks, in case you dont care about the 54mm cleaner, you can just print a 3mm thick deck.
The perimeter has fittings at each end. These hold a portafilter handle & could be used to connect multiple shelves.
The shelf could be improved but its also fully functional & doesnt look bad. Feel free to remix it though!
Included are also legs +10mm longs in case your knock box is a bit higher.
| Crossbeam.stl | 61.6KB | |
| Deck_3mm.stl | 2.3KB | |
| Deck_54mm_Cleaner.stl | 581.5KB | |
| Espresso_Shelf_.f3d | 800.3KB | |
| Legs_1__2.stl | 92.0KB | |
| Legs_1__2_+10mm.stl | 102.1KB | |
| Perimeter.stl | 183.2KB | |
| PortafilterHolder.stl | 356.4KB |
