Video:- https://www.youtube.com/watch?v=BA84jJNz2LU

In this video, we present the enclosure design for our ESP8266 Water Level Indicator project, which is divided into two parts: a main unit and a sensor unit. This design makes it easy for users to place the device correctly and monitor it with ease. After fitting the sensor unit, you can rotate and adjust it as needed. For those who are not familiar with the fitting process, we have included an extra part to ensure the device is straight and secure on the wall.

To help with assembly, we have included a 3D rendering video and an actual 3D printed design to demonstrate how it works. Additionally, we have provided a Part list.pdf file with all the necessary fitting components.

We hope this video will be helpful to anyone interested in creating their own ESP8266 Water Level Indicator project. Thank you for watching!

Part List:-

1. Nodemcu ESP8266.
2. HC-SR04 Ultrasonic Sensor.
3. 1602 16x2 Blue Backlight LCD Display.
4. I2C Module.
5. Single 5V relay board.

Important:-

• We are not responsible for this project's electronic design and programming. So please test the project before starting 3d printing.
• Please follow the part list photo/PDF for the fitting components.
• Use less than 0.2mm layer resolution for 3D printing.

Electronics and programming Information:-
https://srituhobby.com/water-level-indicator-using-nodemcu-and-ultrasonic-sensor-step-by-step-instructions/