ESP32 Screwless Enlosure 3D Printer Model
The file 'ESP32 Screwless Enlosure 3D Printer Model' is (scad,stl) file type, size is 111.3KB.
The file 'ESP32 Screwless Enlosure 3D Printer Model' is (scad,stl) file type, size is 111.3KB.
This ESP32 DevKit enclosure encloses the entire board including the pins. Built in stand-off's ensure the board cannot move once enclosed. The lid clips on securely but can be opened easily.
I'm using these to locate a few ESP32 boards around my house as part of an ESPresense sensor set with Home Assistant. I therefore do not need access to the pins, but also do not want to cut them off nor desolder them in case I want to repurpose them later.
I have included parameterisation of the light guides. I have 5mm Perspex/plexiglass rods I use for lightguides. The included OpenScad file allows for parameterisation to customise this.
Update: Added parameterised access to pins in the OpenScad model and uploaded an STL file with accessible pins)
| ESP32_DevKit_Enclosure.scad | 4.7KB | |
| ESP32_DevKit_Enclosure.stl | 271.0KB | |
| ESP32_DevKit_Enclosure_Pin_Access.stl | 270.0KB | |
| ESP32_DevKit_Enclosure_v2.scad | 5.5KB |
