Compact enclosure for the ubiquitous ESP32-CAM with the USB-Serial board and an external antenna. The program- and reset-button are still accessible through the cooling slits.
Update: SD-Card also accesible now!
The holes in the bottom piece are laid out in a 34x21mm rectangle. They are sized for M3-5x5mm threaded inserts.
Use the combined *.stl file for easy printing. Print time is 3 hours with average printing speeds and 100% infill. Support should not be necessary if your cooling is sufficient.
Additional Materials:
Assembly:
FreeCAD files available here: https://github.com/VaTTeRGeR/ESP32-CAM-Enclosure
| esp32-cam-shell-back.stl | 971.9KB | |
| esp32-cam-shell-combined.stl | 7.0MB | |
| esp32-cam-shell-front.stl | 6.0MB |
