This is a single module or a entire clock I made. This module can be used independently as a 7 segment display or can be daisy chained to make a bigger display. I am currently only uploading the first module and later on other modules.
I will keep adding modules once people start posting makes
more details at :
https://hackaday.io/project/187684-eptaora
single module:
https://www.youtube.com/watch?v=UxFpuAcHJko
spring windiing:
https://youtu.be/I8UE_Bzx4GU
full clock :
https://www.youtube.com/watch?v=qoPwPJhESA8
hardware needed:
M2 x 6 mm self taping screws : 8
1 x 36 mm stainless rod : 2
0.2 mm music/spring wire
0.4 mm music./spring wire
| all_cams_new.stl | 1.6MB | |
| back_connector_no_motor.stl | 481.8KB | |
| bottom_connector.stl | 289.7KB | |
| center_drum.stl | 530.0KB | |
| digits.stl | 792.3KB | |
| digit_caps.stl | 70.6KB | |
| drum_spacer.stl | 26.6KB | |
| eptaora_assemble.rar | 2.0MB | |
| follower.stl | 163.5KB | |
| follower_cap.stl | 20.4KB | |
| follower_spacer.stl | 43.1KB | |
| idler_gear.stl | 272.7KB | |
| left_frame.stl | 576.4KB | |
| main_drive_gear.stl | 797.3KB | |
| motor_back.stl | 1.1MB | |
| motor_cap.stl | 119.1KB | |
| motor_gear.stl | 372.9KB | |
| right_frame.stl | 598.8KB | |
| rod_bending_jig.stl | 237.9KB | |
| top_connector.stl | 180.9KB |
![[translucent] 7 Inch Vinyl Single Desk Clock 3D Printer Model](https://cdn.3axis.co/assets/32/79/86/2e/3279862e-41ee-4bec-bb93-b3f28b97dc67/images/7a629f64-393a-4b8a-b785-f27d0afc5325_thumb.jpg)
