Epson 1400 CIS Ink Caddy 1390 1410 Artisan 1430 3D Printer Model
The file 'Epson 1400 CIS Ink Caddy 1390 1410 Artisan 1430 3D Printer Model' is (step,stl) file type, size is 967.8KB.
The file 'Epson 1400 CIS Ink Caddy 1390 1410 Artisan 1430 3D Printer Model' is (step,stl) file type, size is 967.8KB.
Caddy for EPSON 1390 1400 1410 Artisan 1430 CIS ink system
The details are typed into the photos as instructions. BE CAREFUL removing the left panel and or drilling. I am sure it could be hot glued, epoxied, etc. I like screws.
I am using a cheap CIS system and this works well. YMMV
Fill at 20-40% as long as you have 2 walls (I go 3). Any layer height will work. I used a nice silvery metallic PLA for this one.
ONLY the center hole aligns with the dowell pin on MY 1400, allowing a 1/2" screw without issue (10-13mm should be fine on that hole). Be careful especially if you have a similar but diff model.
STEP and STL files included in case you need to change the width/height.
The "slots" are for zip ties, but I didn't need to use any in my case.
Good luck!
| Epson_1400_Series_CIS.step | 800.9KB | |
| Epson_1400_Series_CIS.stl | 3.3MB |
