WIP...
-=READ BEFORE ASKING QUESTIONS=-
Does not fire a projectile and was designed not to
This one EP-1(N) is the version without the Hammer, sear, disconnector, firing pin,
trigger bar, etc. so it can not shoot caps but it does everything else like chamber & eject.
and disassembles the same.
Full version available EP-1 here
https://cults3d.com/en/3d-model/tool/ep-1-ekcnheb
| 9mm_bullet_v2.stl | 1.1MB | |
| barrel.stl | 4.5MB | |
| BarrelPin.stl | 167.9KB | |
| DissPin.stl | 60.4KB | |
| EP-1N_no_trigger_group_v2.step | 17.9MB | |
| Extractor.stl | 8.3KB | |
| FirePinRetainer.stl | 32.0KB | |
| FiringPin.stl | 263.9KB | |
| Frame.stl | 9.5MB | |
| FrontSight.stl | 18.1KB | |
| HammerAssHousing.stl | 34.3KB | |
| MagBody.stl | 103.5KB | |
| MagFloor.stl | 241.3KB | |
| MagFollower.stl | 219.9KB | |
| Maglock.stl | 27.8KB | |
| MagRe.stl | 623.7KB | |
| MagReSpring.stl | 5.0KB | |
| Pin.stl | 77.2KB | |
| RearSight.stl | 32.5KB | |
| recoilGuide.stl | 75.6KB | |
| Slide.stl | 397.3KB | |
| SlidePlate.stl | 28.6KB | |
| slideRe.stl | 175.6KB | |
| Trigger.stl | 451.7KB | |
| TriggerPin1_1.stl | 84.8KB | |
| TriggerPin2.stl | 79.0KB |
