This is the pump adapter for Ensis valves. You can lug one side in to the SUP pump connector and the other into the Ensis connector. Optionally, there is a place for rubber sealing on one side. But is not needed. It fits perfectly without it.
Print it standing on the top of the smaller side. There is one internal hook that need to be supported from the print plate. But its only small one.
I printed it with 0.8mm nozzle, variable layer height 0.2-0.55mm PETG. Custom support, 4 walls.
Print time with my settings appx 36 mins.
| adapter-ensis.STL | 411.5KB |
