Engine L4 3D Printer Model
The file 'Engine L4 3D Printer Model' is (stl,3mf) file type, size is 5.8MB.
The file 'Engine L4 3D Printer Model' is (stl,3mf) file type, size is 5.8MB.
Simple model of an engine cylinder block with piston and crankshaft. I also plan to make a model of the v8 engine based on this model, and the best motivation is your likes
Short video for assembly - https://youtube.com/shorts/v9T9nrXPUuU?feature=share
(I will probably make a full assembly video with all the details, but that's harder for me than modeling)
Can be printed and assembled without additional parts. Can be spun by the handle.
Can be equipped with motor, speed controller and battery (18650 with pin).
Examples of additional pieces:
Special designations in model names:
I have tried to put all the parts (stl) in the correct orientation for printing
There are several types of crankshaft - standard and as in v8. They also differ in the flywheel mounting (nut or circlip). You can choose what you like. I recommend the standard crankshaft with nut, but the nut requires printer quality adjustments (or reducing the speed of small perimeters)
I recommend printing the crankshaft this way with the wood supports. Yes, it's long and plastic wasteful (the supports weigh as much as the part), but it's high quality. I've tried printing the crankshaft horizontally - the appearance isn't pretty, but it should be more stable.
I recommend sanding and lubricating the inside of the cylinders.
| bolt.stl | 229.2KB | |
| bot.stl | 498.8KB | |
| bot_wo_bat_repl.stl | 200.7KB | |
| connect_cup_x4.stl | 34.8KB | |
| connect_x4.stl | 123.1KB | |
| crankshaft.stl | 915.7KB | |
| crankshaft_screw_repl.stl | 1.1MB | |
| crankshaft_v8_like_repl.stl | 915.7KB | |
| crankshaft_v8_like_screw_repl.stl | 1.1MB | |
| door_gear.stl | 143.4KB | |
| door_handle.stl | 136.8KB | |
| door_lock_x2.stl | 2.6KB | |
| el_cap.stl | 7.3KB | |
| handle_cap_in_pip.stl | 180.7KB | |
| handle_main.stl | 2.5KB | |
| head.stl | 648.6KB | |
| head_cap.stl | 663.1KB | |
| h_stub.stl | 33.4KB | |
| knee_cir.stl | 30.0KB | |
| knee_nut_repl.stl | 945.3KB | |
| L4.3mf | 2.9MB | |
| main_gear_1.stl | 421.2KB | |
| main_gear_2_repl.stl | 302.2KB | |
| motor_gear_1.stl | 90.3KB | |
| motor_gear_2_repl1.stl | 199.9KB | |
| pin_hidden_x2_repl.stl | 1.8KB | |
| pin_x2.stl | 1.8KB | |
| piston_head_hight_tol_x4_repl.stl | 641.8KB | |
| piston_head_x4.stl | 636.1KB | |
| piston_rod_x4.stl | 25.0KB | |
| stub_opt.stl | 30.1KB |
