Endstop Switch Mount 3D Printer Model
The file 'Endstop Switch Mount 3D Printer Model' is (stl) file type, size is 22.8KB.
The file 'Endstop Switch Mount 3D Printer Model' is (stl) file type, size is 22.8KB.
This is a bracket for mounting one of those micro endstop switches to 8mm smooth rod. I originally intended to use this style mount for the z axis but It worked well and I ended up using it on the x axis as well. These little switches (pictured above) have a body that measures about 13mm long x 5.8mm wide x 6.2 tall. I designed this bracket in three pieces so that it could be printed without support material and the assembly is pretty straight forward. Use 2 3mm x 10mm bolts to fix the switch receiver piece to the main body of the bracket (or just glue these together with a bit of epoxy as they will not need to be separated again) and 4 3mm x 20mm bolts to capture the cap/saddle around the smooth rod. I have found that this makes a rock solid connection, I have not had one slip yet.
| endstop_bracket.stl | 106.5KB |
