I decided to build a printer case.
The whole case is of two tables from ikei (lack) as a Prusa cover and four plexi glasses.
Purchased parts - 2pcs ikea table (lack)
4pcs of plexi (445x800mm) thickness 3mm
2pcs Aluminum tube (diameter 30mm-500mm)
some screws :)
10 second glue
Why? reduce noise,
no more dust,
cover the filaments (less humidity)
You can put extruder on the top and Z axis is leighter
Print time: 42h
Print material: 385g of PLA
HingeL/R Inf. 20% Layer height 0,2
Corner L/R Inf. 20% Layer height 0,2
Rail Inf. 30% Layer height 0,15
Table_connector Inf. 20% Layer height 0,2
In the future I will add: power supply holder, led strip, smoke detector, thermometr, LCD panel.
| Corner_L-6pcs.STL | 138.7KB | |
| Corner_R-6pcs.STL | 138.7KB | |
| Filament_holder-4Pcs.STL | 711.6KB | |
| Hinge_L-8pcs.STL | 36.4KB | |
| Hinge_R-8Pcs.STL | 36.4KB | |
| Plexi_glass_Rail_6pcs.STL | 2.8KB | |
| Table_connector-4Pcs.STL | 135.2KB |
