Ender Neo – BTT Eddy Mount Adapter 3D Printer Model
The file 'Ender Neo – BTT Eddy Mount Adapter 3D Printer Model' is (stl) file type, size is 7.8KB.
The file 'Ender Neo – BTT Eddy Mount Adapter 3D Printer Model' is (stl) file type, size is 7.8KB.
This is an adapter that attaches to the existing CR-Touch mount to allow the BTT Eddy to be mounted.
You will need:
(2) M3x6
(2) M3x20
(2) M3 Nut
Use the (2) M3x6 Screws to attach the adapter to the CR-Touch mount
Use the (2) M3x20 and (2) M3 Nut to attach and tighten the BTT Eddy to the desired Z-Height
| Ender-Neo-eddy-mount-v2.stl | 45.2KB |
