Ender Cr Touch Light Shield 3D Printer Model
The file 'Ender Cr Touch Light Shield 3D Printer Model' is (SLDPRT,STL) file type, size is 847.8KB.
The file 'Ender Cr Touch Light Shield 3D Printer Model' is (SLDPRT,STL) file type, size is 847.8KB.
Steps for installation:
Step1: Remove the hot end cover (2 Screws) and remove the two screws mounting the Cr-touch.
Step2:Remove the Steel mount (2 Screws) and the Cr-touch cable.
Step3: Slot in the CR-Touch from the bottom and leave some space in-between the 3d printed end and the Cr-Touch.
Step4: Now slot in the mount through the given Cutout and tighten the Cr-touch with the bracket.
Step5:Replace the bracket with the head and close it with the hot end cover and connect the Wire.
| CR-Touch-Dummy.SLDPRT | 820.6KB | |
| CR_Touch_Light_Cover.STL | 93.1KB |
