This housing will take A Bigtreetech SKR 3 mainboard and Raspberry Pi. It has front and rear housings. The rear is for power supply and mosfet, front for the main board and RPi. The power supply is held by M4 tapered head bolts.The machine requires taller feet to be able to flush mount the housing. A spot for a USB charger to power the RPi
https://amzn.asia/d/aL8vDLC
designed so hotend cabling comes out front right hand side for ease of access
| E5+_40mm_feet.stl | 37.6KB | |
| E5_plus_fan_holder.stl | 83.3KB | |
| E5_PLUS_SKR_3_MCU__Pi_housing.stl | 1.8MB | |
| E5_PLUS_SKR_3_MCU__Pi_housing_front.stl | 1013.1KB | |
| E5_PLUS_SKR_3_MCU__Pi_housing_rear.stl | 957.0KB | |
| E5_Plus_SKR_3__Pi_Housing_Drawing.pdf | 182.7KB | |
| Housing_Lid.stl | 3.8KB | |
| Lid_handle.stl | 1.4KB | |
| PSU_cable_tie_point.stl | 26.3KB |
