Ender 5 Plus PrinterMods MDD Winsinn Extruder Adapter 3D Printer Model
The file 'Ender 5 Plus PrinterMods MDD Winsinn Extruder Adapter 3D Printer Model' is (stl) file type, size is 104.2KB.
The file 'Ender 5 Plus PrinterMods MDD Winsinn Extruder Adapter 3D Printer Model' is (stl) file type, size is 104.2KB.
Hello,
This is for the direct drive system by PrinterMods found at the link below.
https://printermods.com/products/direct-drive-mod-for-creality-ender-3-cr-10
It is designed to work the Winsinn All metal extruder for the Creality Ender 5 Plus. What's more of a pain in the butt if you can't see the extruder because it is facing away from the front of the printer? Well this solves the problem. You can visually feed the filament through the extruder.
Another reason I opted to flip it around is to put the weight over the X axis since the motor has some weight to it. Also it will help set it up for future fan upgrades such as the Hero Me.
Attached are two versions. One with the Cable holder and one without.
Due to motor heat, PETG at a minimum.
| Winnsinn_Adaptor_MDDV1.stl | 136.9KB | |
| Winnsinn_Adaptor_MDD_w_Cable_Hold.stl | 239.1KB |
