Ender 5 Open TriFan Twin 4010 Fan BL-Touch Hotend Housing 3D Printer Model
The file 'Ender 5 Open TriFan Twin 4010 Fan BL-Touch Hotend Housing 3D Printer Model' is (stl,stp) file type, size is 10.9MB.
The file 'Ender 5 Open TriFan Twin 4010 Fan BL-Touch Hotend Housing 3D Printer Model' is (stl,stp) file type, size is 10.9MB.
Modification to motoyoyo's amazing compact trifan for the ender 3
Main housing only so please go to the original upload by motoyoyo for the mounting bracket and fan ducts.
I've opened the front to allow easy changing of the heatsink fan
I've also chopped the plastic away below the BL-touch mount as the carriage pull sits there on the Ender 5.
The third fan can be plugged straight into the main board as per the picture. I used 2x 90cm 2 pin JST extensions for this so no splicing required. You can splice the wires if you want but this is far quicker and easier and also quicker for future fan changes.
You might need to swap the wires round if the fan doesn't work when you plug it in - easily tested before you screw everything back together by turning the machine on and pressing the fan button.
I printed mine in PETG with supports but I think it will be OK in PLA as it's not too close to the heat block
| Open_Trifan.stl | 2.2MB | |
| Open_Trifan.stp | 41.0MB |
