Ender 3v2 motherboard enclosure for BTT Manta M8P.
UPDATED 03/12/22
**Added more screw points to join the two halves together to give a stronger overall enclosure.
**Moved slot for DSI/SPI cables for screen/camera.
Features:
Capacity for 2 x 4010 fans
Plenty of wiring space
MCU and Pi CM4 Micro SD access (without having to disassemble or flip printer over)
I/O panel access (without having to disassemble or flip printer over)
Hi Airflow
Fully Enclosed
Honeycomb design air intake and fan outlets.
Riser feet matching honeycomb design.
Main body split in two for smaller print beds.
You will need:
2 x 4010 12/24v fans
4 x M2x12mm socket head screw
4 x M3x6mm socket head screws
4 x M3 nuts
2 x M4x6mm Pan head screws
2 x M4 T-slot nuts
4 x M4 Pan Head Screws (Same as the screws on the stock housing on left hand side of printer)
THIS IS A WORK IN PROGRESS - IF YOU DO PRINT THIS AND FIND ANY ISSUES OR IMPROVEMENTS PLEASE LET ME KNOW!
| Ender_3v2_BTT_Manta_M8P_IO_Access_Cover.stl | 16.6KB | |
| Ender_3v2_BTT_Manta_M8P_Left_Fan_Cover.stl | 103.7KB | |
| Ender_3v2_BTT_Manta_M8P_Left_Foot.stl | 74.1KB | |
| Ender_3v2_BTT_Manta_M8P_Left_Housing.stl | 184.3KB | |
| Ender_3v2_BTT_Manta_M8P_Right_Fan_Cover.stl | 103.7KB | |
| Ender_3v2_BTT_Manta_M8P_Right_Foot.stl | 74.1KB | |
| Ender_3v2_BTT_Manta_M8P_Right_Housing.stl | 191.0KB |
