Small wood house with snow on the roof (and some tracks on it ;)) that you can use as an LCD cover for decoration or just to shade the glow
More photos:
https://www.instagram.com/p/CXn5I0hN1jm/
and
https://www.instagram.com/p/CXn53mbteN5/
Additionally there is an xmas tree shaped knob with a star on top
House is cut with 22,5 angle as LCD metal frame and will fit it's hole - there is a model without a cut so you can cut it for different printers lcds if it is with the same proportions
The base is 78x48mm. The frame hole should have around 80x52mm - if it is slightly smaller than the house you can resize the model
It is printed in two parts
You can use the base alone if you want
IMPORTANT
The model is highier than top of the bed
If you have original extruder case (with the hotend not motor) you can't print at least up to 2cm on the right because extruder will collide with the house
With moddified extruder (for example with bigger fans on sides) it will need even more space so remember this
Made in Blender 3D
Printed on Creality Ender 3
More Christmas decorations on my Thingiverse collection
| Ender_xmas_house_base.stl | 130.3KB | |
| Ender_xmas_house_base_NOcut.stl | 131.7KB | |
| Ender_xmas_house_roof.stl | 2.1MB | |
| Ender_xmas_house_roof_no-supp.stl | 2.1MB | |
| Ender_xmas_house_supp-roof.stl | 8.8KB | |
| Ender_xmas_tree_knob.stl | 141.5KB |
