Ender 3 V3 SE – Tool Rack REMIX 3D Printer Model
The file 'Ender 3 V3 SE – Tool Rack REMIX 3D Printer Model' is (stl) file type, size is 50.5KB.
The file 'Ender 3 V3 SE – Tool Rack REMIX 3D Printer Model' is (stl) file type, size is 50.5KB.
Easier to print tool holder. I liked the original design, but the standoffs (or risers) that hold the screen weren't tall enough, which caused my screen to be loose and it REALLY irked me. Took inspiration from a different screen relocation bracket, and designed the risers to be snapped in afterwards, allowing you to dial in the fitment. I tried multiple sizes and settled on 8.2mm tall, so if you need to adjust them in your slicer, this is the number you want to change, leave the other 2 alone. This redesign makes the main bracket MUCH easier to print (and also a lot faster). As for the tool holder, I removed the pencil slot, moved the nozzle slot up, and added a rectangle to hold the USB card adapter that the print comes with, everything else was left alone.
| ScreenRiser8.2.stl | 684.0B | |
| ToolHolderUsb.stl | 95.4KB | |
| ToolMountEdit.stl | 81.0KB |
