Ender 3 V3 Se Cooling Tuning To 40mm And Dual 5015 Fans 3D Printer Model Free Download

Author: @Serhio_K

File formats: stl

Download type: zip

Size:587.1KB

The file 'Ender 3 V3 Se Cooling Tuning To 40mm And Dual 5015 Fans 3D Printer Model' is (stl) file type, size is 587.1KB.

Description Files (2)

Summary

This is my version of Ender 3 V3 SE cooling upgrade to dual 5015 fans, 40mm silent hotend cooler and LED (optional).

I decided to use 12V 4010 cooler due to was planning to connect LED to the same DC-DC step-down converter.

To assemble you will need:

5x M3x8mm screws
1x M4x20mm screw
1x M3x40mm screw
4x M3 heat inserts (for 4010 fan)
4x M3x14mm screws (for 4010 fan)
2x 5015 24V blowers (designed it for GDSTIME dual ball bearing 6000rpm fans from AliExpress)
1x 4010 24V or 12V radial fan (I have 12v Noctua)
DC-DC (in case you going to use 12V 4010 fan).
soldering set to change fan connectors and combine 2 x 5015 into 1 connector.
heashrink tube for wires isolation

Enjoy =)

Tips for creators are always welcome. Just hit "Tip designer" above :)

As alternate left side shroud this you may use left shroud from this project. It uses ender's frame mount hole. This file: Duct_Left_Stock.stl
https://www.printables.com/model/667051-dual-5015-blower-duct-for-ender-3-v3-se

40mm+5015_mod_Center+Right.stl	877.3KB
5015mod_left_shroud.stl	554.6KB