Ender-3 V3 Plus Collection 3D Printer Model
The file 'Ender-3 V3 Plus Collection 3D Printer Model' is (stl) file type, size is 8.6MB.
The file 'Ender-3 V3 Plus Collection 3D Printer Model' is (stl) file type, size is 8.6MB.
Note: This only fits the E3V3 Plus printer. For the smaller E3V3 printer see Ender-3 V3 Top Spool Holder With Sensor.
A collection of upgrades and add-ons which are, to me, pretty essential. Included are:
All bar the Camera mount snap snugly on to the frame, and only two sets of additional items are required.
For the Sensor Bracket you'll need an extension to its wiring cable. One example I found is called “XH 2S LiPo battery balance extension lead” and you'll need a 200mm / 20cm length.
For the Camera Mount you'll need two additional M3x10mm bolts.
The top mount uses items from other models, I've included the STL files for convenience:
The Roller mechanism and upper frame dimensions are derived from this model:
The Roller bearings are from this excellent collection:
I've included their Default and Loose versions of the M608 bearing here. Some working of them to smooth the insides plus some dry PTFE spray does wonders.
| 608_bearing_default.stl | 358.5KB | |
| 608_bearing_loose.stl | 358.5KB | |
| E3V3_Plus_Light_and_Cable_Bracket_-_Left.stl | 3.0MB | |
| E3V3_Plus_Light_and_Cable_Bracket_-_Right.stl | 3.0MB | |
| E3V3_Plus_Top_Sensor_Bracket.stl | 2.2MB | |
| E3V3_Plus_Top_Spool_Holder.stl | 8.8MB | |
| E3V3_Plus_Top_Spool_Holder_-_Logos.stl | 591.1KB | |
| E3V3_Plus_Z-Axis_Nebula_Camera_Mount.stl | 2.0MB | |
| Spool_Holder_Roller.stl | 765.7KB |
