The file 'Ender 3 V3 CoreXZ Anti Tangle Filament Clips For The Side Spool Holder_PTFE Tube Version 3D Printer Model' is (stl) file type, size is 78.1KB.
I found the anti-tangle filament rack solution of Creality problematic, so here comes my solution to the problem..
The part clips to the original spool holder from the bottom and can be adjusted through the holder's side, bring it close to the filament_spool edge but no touch..
Find a PTFE-teflon tube and use around 3cm of it for the hole in the part (I used the small PTFE tube from the runout sensor) , offset the tube from both sides so it can work in every angle.
I uploaded a stronger arm version (Ender_3_v3_Anti_Tangle_Filament_clips_for_the_side_spool_holder_PTFE_tube_version_stronger arm.stl) if you are having problems with slim parts.
Everything is really tight fit which have to be for this application . Use reasonable force.
0.2mm 3 walls 50% infill
Feedbacks will be appreciated.
| Ender_3_v3_Anti_Tangle_Filament_clips_for_the_side_spool_holder_PTFE_tube_version.stl | 93.2KB | |
| Ender_3_v3_Anti_Tangle_Filament_clips_for_the_side_spool_holder_PTFE_tube_version_stronger_arm.stl | 99.9KB |
