This is a remix of https://www.thingiverse.com/thing:3877505 and i changed some dimensions because the tools that comes with the Ender 3 V2 won't fit properly.
- I got rid of the two additional screwdriver holes and the feeler gauge holder.
- I changed some tolerances of the grooves because the original fit was to lose. My design is a really tight fit with a tolerance of less than 0µm (you will need high force to put it on).
- I changed the slot of the scraper because the original one won't fit the tool properly
- I widened one slot for the single wrench because it was to small
- I got rid of the hook because i don't know what it is for
I uploaded three files:
- one with the deleted slots/holder mentioned above
- one that is shortened due to material saving but keeping text
- one completely shortened without text
- a cad file of the original holder modified by me (if you want to modify more)
Make sure to set the angles of the supports to 80°. If you have trouble printing this, use my settings down below.
My frame thickness of the 20x20 alu-profil is 1.52mm (groove) so make sure you have the same dimensions
