This is a remix of Ender 3 V2 Riser Feet.
I didn't have the orignal rubbers still there but I had 3mm rubber pieces around, so I decided to remix the feet.
First I modified the height to be 35mm without any rubber, because otherwise it would be to short for the Ender v2 Silent Mods.
Then I decreased the gap for the rubber to 1mm total. Now you can use any rubber thicker than 1mm. I suggest 3mm and above.
Print them as original on the side so you won't need supports and the mount for the rail will print fine.
| Feetv2.stl | 14.9KB |
