Remix of a Remix. ScaryPug designed a brilliant 80x25mm fan mount remix of the also great Ender 3 v2 8010 fan housing/mount by TerraVestra. Since the scaryPug design was extended for a 80x25mm fan, I'm modifying back to match the TerraVestra 80x10mm design depth. (I have a 80x10mm fan which is great for this application because it came with a wire grill/guard that can be used to keep the wires from touching the fan blades.)
I've also cleaned up the STL file (fixed some gaps and misaligned surfaces) and replaced the threaded holes from the scaryPug version with straight holes. I find that screws thread themselves just fine into unthreaded holes in PLA and removing the threads cuts down on model complexity. The 80x25 STL is included in the parts files.
There are two versions of each size. Each one will mount one 80mm fan and one LM2596 module.
ScaryPug's design is the first model I had encountered that used the infill to make a mesh/grill (pure genious!). This can be done easily in Cura by setting the top and bottom layers to 0.
| E3v2_MB_cover+grill_8010Fan__v1.1.stl | 2.8MB | |
| E3v2_MB_cover+grill_8025Fan__v1.1.stl | 2.9MB | |
| E3v2_MB_cover_8010Fan_v1.1.stl | 2.2MB | |
| E3v2_MB_cover_80250Fan_v1.1.stl | 2.3MB |
