Ender 3 V2 Laser Holder 3D Printer Model
The file 'Ender 3 V2 Laser Holder 3D Printer Model' is (stl) file type, size is 7.6KB.
The file 'Ender 3 V2 Laser Holder 3D Printer Model' is (stl) file type, size is 7.6KB.
A simple bracket design to hold a 30mmx30mm laser so that it is positioned under the extruder making it easier to set the X & Y axis offsets. (don't really need to with this)
It will also allow almost full bed width laser etching.
The laser is held in place by a thin metal sheet glued to the vertical wall, using the magnets that are attached to the laser body to hold there.
You will need to print with supports, the current design suits standard Ender 3 V2 and also has a cutout for the mounting screw if you have a fang. (refer to .stl - photo shows V1 with smaller cutout)
To use this simply lift the Z Axis to 120mm, (more if you like) that will give you about 50mm between the laser and the bed, adjust focus, and print..
| laser_bracket_one_piece.stl | 32.2KB |
