This is my version of Ender 3 tool holder for all needed tools including screwdrivers, wrenches, Allen keys, pendrive and tool hangers. I have made two hangers: first for clippers, second for pilers.
The gap between hangers and whole walls is 0,1 mm, so you do not need to glue it.
Just press tight and that's it. If you use filament with higher shrinkage - just put some glue on the back of hangers.
For myselfe I use PET-G for this print.
Print settings:
PET-G Devil Design
printing temp.: 230/70 with no cooling
0.2 mm layer (0.4 mm nozzle)
1.6 mm walls
print on raft with 5 mm extra margin
| Ender3_tool_holder2.stl |
