HOW TO USE A TEMP TOWER:
Run this G-code (or code the STL yourself) and see which temp gives you the least amount of stringing and best overall look and strength.
Check out my calibraton guide on Reddit for more detailed tuning instructions.
CHANGE LOG:
Removed the base from the original when I sliced it up. Included is the gcode file. Made for my Ender 3 Pro, but should work on any printer.
If you download the STL you will have to manually code the temperature changes. If you download the gcode, you can just run it as I have configured it to change temp already.
Just pop the gcode onto your sd card and hit print.
06 Jan 20: Added PETG gcode file. Fan set to 80%.
04 Feb 20: Re-uploaded both files based on STOCK Cura 4.4.1 Profiles for PLA and PETG in "Standard Quality" settings. Only things that were changed from the stock profile are adding a brim for stability, and increasing bed temp to 80C and reducing fan speed to 80% for PETG.
| SmartTemperatureTower_PLA_180-225.stl | 2.4MB | |
| TempTower_PETG_220-260_6.5-45_Retraction_80_Fan.gcode | 3.1MB | |
| TempTower_PLA_180-220_6.5-25_Retraction.gcode | 3.0MB |
