Parts to convert an Ender 3 S1 Plus to a laser cutter/engraver. This uses the Creality Laser Module. Parts should be easy print, with no supports.
The corner brackets hold a 300x300mm honeycomb bed in place.
This should work with most 2020 profile devices that use the MK8 print head and a 310x310mm bed (CR10 style).
A special note
I am using a stripped down bed, with no magnet or thermal pad. The bed clips currently
only support 3mm thick beds.
The shorter bed spacers are included and should be printed in TPU. If still using as a 3D printer I would keep the springs in place and print the corners out of a higher temp plastic.
I placed the device in a printer tent to control fumes/smoke.
Let me know what you think.
| Controller_Holder.step | 60.0KB | |
| Controller_Holder_Meshed.stl | 1.0MB | |
| Corner_Clamp_M3_Meshed.stl | 12.6MB | |
| Corner_Clamp_M4_Meshed.stl | 12.6MB | |
| Laser_Mount.step | 91.2KB | |
| Laser_Mount_Meshed.stl | 2.1MB | |
| M3_Bed.step | 145.6KB | |
| M4_Bed.step | 145.5KB | |
| Spacer_M3_Meshed.stl | 474.7KB | |
| Spacer_M4_Meshed.stl | 457.1KB | |
| Thumb_Wheel_M3.step | 1.6MB | |
| Thumb_Wheel_M3_Meshed.stl | 5.1MB | |
| Thumb_Wheel_M4.step | 1.6MB | |
| Thumb_Wheel_M4_Meshed.stl | 5.0MB |
