ENDER 3 S1 PLUS Gantry Reinforcement 3D Printer Model
The file 'ENDER 3 S1 PLUS Gantry Reinforcement 3D Printer Model' is (stl) file type, size is 157.3KB.
The file 'ENDER 3 S1 PLUS Gantry Reinforcement 3D Printer Model' is (stl) file type, size is 157.3KB.
This is a design to reinforce the Z axys Gantry on the Ender 3 S1 PLUS to minimize wabble.
You need to print the Top Left and Top Righ part as well as one pf the 3 available versions for the bottom parts:
V3 fits the stock printer (might need foot a bit taller than the original rubber foot of the printer, to be verified)
V2 is a version that fit small foot like V3 and the honeycomb bottom plate that you can find here: 6497954
V1 is the Original version. It is a bit stronger and fit the honeycom bottom plate (6497954) as well as the taller foot i designed that you can fin here: 6497745
This design can fit with a Creality Light Bar screwed on the side of the Z axys Gantry (see picture)
| Top_Left.stl | 47.8KB | |
| Top_Right.stl | 49.0KB | |
| V1_Left.stl | 103.3KB | |
| V1_Right.stl | 96.9KB | |
| V2_Left.stl | 102.5KB | |
| V2_Right.stl | 96.1KB | |
| V3_Stock_Printer_Left.stl | 102.7KB | |
| V3_Stock_Printer_Right.stl | 96.1KB |
