Ender 3 (+Pro) Side Mounted Pi 3B+ Case & Camera System 3D Printer Model Free Download

Description Files (15)

Summary

This is a new version of my side-mounted Pi case and V2.1 Camera system

Previous Pi Case Design
Previous Camera Mount Design

I wasn't satisfied anymore with the fact that the original design routed the camera ribbon cable out and away from the machine, making it easier to run into and taking up more space than it should. I also wanted to improve the case mounting points based off of Jack Werner's remix of the original design

Improvements:

The camera ribbon cable takes 90 degree bends in order to save on space while also providing additional support for the linkages
The Pi Case now mounts to the same face of the aluminum extrusion on the printer chassis, eliminating the need for big supports and decreasing print time
The built-in link on the Pi Case Lid is now much stronger and doesn't require additional supports to print correctly

CAD .STEP files are also included to make these parts easier to remix, but I've only included them for models I actually needed to edit.

EXTRA: I've included a special version of the Pi Case Lid (PiCase_Lid_Standalone) if you prefer to use the case on its own without any of the linkage systems.

Linkages connect together in the following order:

Pi Cam Bracket + Link Corner + Link (x16) + Link Corner + Link Extension + Pi Case Lid

Hopefully the pictures I've included also help in assembling the linkages correctly!

Part Name	Quantity	Infill (%)	Supports
Link	16	100	No
Link Extension	1	100	No
Link Corner	2	100	No
Pi Case Lid	1	100	No
Pi Case Base	1	20	Yes
Pi Cam Bracket	1	20	No
Pi Cam Front	1	100	No
Pi Cam Back	1	100	No
M4 x 8mm Bolt	2	---	---
M4 T-Nut	2	---	---
M3 x 15mm bolt	2	---	---
M2.5 x 12mm Bolt	4	---	---
60cm Ribbon Cable	1	---	---

Link.step	1.1MB
Link.stl	96.8KB
Link_Corner.step	787.1KB
Link_Corner.stl	640.2KB
Link_Extension.step	664.0KB
Link_Extension.stl	514.0KB
PiCam_Back.stl	374.9KB
PiCam_Bracket.step	654.8KB
PiCam_Bracket.stl	6.4MB
PiCam_Front.stl	429.0KB
PiCase_Base.step	256.7KB
PiCase_Base.stl	2.9MB
PiCase_Lid.step	1000.5KB
PiCase_Lid.stl	2.4MB
PiCase_Lid_Standalone.stl	2.3MB