The original dual-drawer system was pretty much exactly what I wanted (I do wish it was able to fit the spatula though) but it left a little gap between the Y-Axis bar.
I then added squashball feet, and without knowing it, the feet protruded out a bit and made the drawer unusable.
I used Blender to lower the rail bars down a bit- my first time remixing! Now it sits flush. This might not be necessary for people that don't have the feet, but it was perfect for me.
EDIT: On first print, my Y-Axis screw heads dragged across the top of it. I've since gone ahead and shortened the top section by a ~.3mm so that doesn't happen. Let me know if you have problems and I'll fix it! I also raised the bottom by .15mm. It was already flush with my feet, but just a little bit more never hurt.
EDIT 2: Since all y'all been askin', here's the OG Thing Link. I thought everybody could see it from Remix section. I also added his V3 Drawers right to this in case that's annoying. Thanks @DWS_design
| Bottom_Drawer.stl | 262.4KB | |
| Drawer_Case_Remix_-_Flush_Dropped_2020_Rail.stl | 11.9KB | |
| Top_Drawer.stl | 263.9KB |
