Ender 3 (Pro) – 3510/3010 Dual Fan Duct – Unibody 3D Printer Model Free Download

Description Files (4)

Summary

Here is a "unibody" remix of my previously designed fan duct with dual part cooling for the Ender 3 (Pro).

For the assembly you need:

1x 3510 fan
2x 3010 blower fans
1x M3x12 screw
2x M2x5 or M2.5x5 screws (minimum)

Assembly: First insert the two 3010 fans in their places on the sides (at least fasten at the back with M2/M2.5 screws, the front is optional), finally clip in the 3510 fan at the front.

Installation on the carriage: first lock on the right side and then press the left side onto the carriage - finally screw tight with the longer M3 screw from behind through the carriage into the duct.

Versions:

There are mainly two versions "with or without BlTouch": they differ in the depth of the standoff for the M3 screw - the shorter one is for mounting on top of a BLTouch mount.
There are also two versions "with or without LED": one of them is for integrating a 4xled board (the dimensions are designed for the "AURORA RC WS2812B RGB5050 Mini Programmable LED Board ").

Tinkercad Project: https://www.tinkercad.com/things/bemlDqQG9FV

Blower Performance: https://youtu.be/B8FgLm8Qpb8

Ender 3 - Sherpa Mini Extruder Mount: https://www.thingiverse.com/thing:5187693

Ender_3_Pro_-_3510-3010_Dual_Fan_Duct_-_Unibody_-_wBLTouch-wLED.stl.stl	486.4KB
Ender_3_Pro_-_3510-3010_Dual_Fan_Duct_-_Unibody_-_wBLTouch-woLED.stl.stl	494.2KB
Ender_3_Pro_-_3510-3010_Dual_Fan_Duct_-_Unibody_-_woBLTouch-wLED.stl.stl	495.7KB
Ender_3_Pro_-_3510-3010_Dual_Fan_Duct_-_Unibody_-_woBLTouch-woLED.stl.stl	485.8KB

Ender 3 (Pro) – 3510/3010 Dual Fan Duct – Unibody 3D Printer Model

Summary

Tags

You might also like