#######################################################
Ender 3 LED Mount - highly modular, little support
#######################################################

The idea was, to be very flexible in which lightning devices and cables are used.
Also the amount of mounts that are used and the position can be choosen freely.
It's also meant to be remixed, if you, for example, want to use WS2812 instead of
standard LEDs, or someone wants to somehow use plugs at the mounts.
It would be really cool, if you allow me then, to add the new part to the Thing-Files to
bring on the modular idea.
You can also contact me, if you need a new Part and I will see, if I have the time to design.
There are also a lot of tight fits. Feel free to contact me if the tolerances are bad in your opinion.

Basic Parts:
Case [A-Files]
Roof [B-Files]
Cable Plate [C-Files]
LED Tap [D-Files]

Combinations and Amounts:
A2-4 + B1 + Cx + Cx
or
A1 + B1 + Cx + Cx + Dx

The A-Files with additional 'Xmm' are used for simply stick the LED in the case, where
X is the diameter of the LED.
The A-File with additional 'modular' needs to be used with the D-Files, where the X
follows the same rule as above.

Printing Information:

Case [A-Files]
Support: Yes
Printing Time: ~2h
Infill: 80%

Roof [B-Files]
Support: No
Printing Time: ~10min
Infill: 100%

Cable Plate [C-Files]
Support: No
Printing Time: ~5min
Infill: 100%

LED Tap [D-Files]
Support: No
Printing Time: ~15min
Infill: 100%

Remarks:
I only tested the LED-hole for 5mm diameter, cause that was the only one, I had at the time of design.
The other diameters (3mm, 7mm) are made with the same tolerance as 5mm, with the assumption, that
the tolerance on the LED outer diameter is the same as with 5mm. [11.06.21]

I plan to design a longer and a shorter version of the mounts. [11.06.21]

A Little Favour:
You can use the data as you want, and the B,C,D-Files are really meant to be remixed.
But I ask to share the remixes with me, espacially when you think, it is useful for
a lot of other people.
Of course I will mention the designer.
But I won't force you to do, it just would be nice to bring on the modular idea.