Ender 3 bed mount for the ArduCam NOIR raspberry pi camera with the motorized IRCut filter. Made to record to record better timelapses. The small arm and case are mine. The case is from a previous z axis mount i made. It will be listed in the attributed remix sources. I borrowed the bed attachment and long arm from Kitamo's Rasp Pi cam bed mount. A small amount of m3 and m4 hard ware is needed.
This is what i used, but anything equivalent should work.
-2 pcs m4 lock nuts
-2 pcs m4x20mm bolts
-1 pcs m3x15mm bolt
Disclaimer: the range of motion isn’t what I’d like it to be. It works, but until I make changes to the file, some light sanding on the small arm could help widen its range of positions.
Also, i have come to not like this setup at all. Within the next week i'll be redoing the case and small arm. The large arm and bed mount will remain unchanged. Initially i tried to do this without having to change the attachment point on the case, because it's a case i already made for a different mount. But to do this right, I need to make those changes. In the mean time i will leave these files up in case someone can make use of them.
arm.stl | 74.9KB | |
Case_Back_with_Pi_logo.stl | 880.8KB | |
Case_Front_with_LED_window.stl | 209.1KB | |
holder.stl | 206.4KB | |
small_arm.stl | 97.3KB |