This is a remix of 'Ender 3 Tool Holder - 2.0!' by Kiesling.

This creation is used as a storage option with incorporated closure of the PCB board at the back of the Ender 3 control panel. This design uses the two front screws of the control panel for attachment to the printer. Additional support is given by an extended back wall which is placed on the right foot of the Ender 3. For the full cover of the control panel a base plate, which is slid into the right foot, serves as a connector for a side wall. A slide at the top part of the principal holder serves as a guide for correct placement of the panel.

Installation:
1) unplug and remove the control panel from the printer
2) put the holder to the spot of the panel
3) slide the base plate into the right foot next to the holder
4) plug in the cable into the control panel
5) mount the control panel and attach it with the two front screws together with the holder
6) connect the side wall

The right side of the closure aligns with the panel so that no interference to other created parts is expected.

The big drawer is supposed to offer space for smaller stuff (printed clamps, cleaning tissue, etc.). It can also be used for tools but there are better printables out there (https://www.thingiverse.com/thing:4580619).

The triangle drawer has some extra space for a few nozzles in the front while the back part can be used for other stuff (e.g. screws).