3D Printer Models

Ender 3 – Fresh Air System For Melzi Board V1.0 3D Printer Model

Author: @3D-FloW

License: CC BY-NC-ND

File formats: stl

Download type: zip

Size:165.9KB

The file 'Ender 3 – Fresh Air System For Melzi Board V1.0 3D Printer Model' is (stl) file type, size is 165.9KB.

Description Files (6)

Summary

Ender 3 - Fresh Air System

I got big heat problems with my "Melzi-Board" inside my "Ikea Lack" enclosure for the Ender 3.
It can reach up to 40-50°C inside the enclosure, especially @printing with ABS!!

And this is my solution for this problem!

Notes:

The grommet lengh fits for a "Ikea Lack" table.
The grommets outer diameter is Ø32mm
Tube holder is optional (i got a problem with the electric cable pipe cause its very
inflexible and often crashed into the heatbed), this one keeps the pipe in place.
Washer is optional (if you make by mistake the hole bigger than expected through the
lack table, like i did)

Things you need:

electric cable pipe or any other tube with an outer Diameter of Ø25mm
a "Can Drill" with Ø32mm

=====================

Have fun Printing!

Board_Fan_Guard.stl	1.2MB
Fan_Adapter.stl	106.8KB
Grommet_Bottom.stl	42.7KB
Grommet_Top.stl	45.3KB
Tube_Holder.stl	44.2KB
Washer.stl	20.8KB