There is now a Longer version of the holder for larger spools, this version is not tested.
This is a spool holder that I made so I could use filament from a spool that was too small for the stock spoolholder on my Ender 3.
It works great!! even with larger spools (max 1KG, or maximum width of 65mm or with the longer untested version you can use spools ut to 85mm).
When mounting the adaptor you can use the stock nuts so you dont have to print or buy any new.
If you have lost the original nut you can print it using THIS NUT HAS NOT BEEN TESTED BY OP this model :).
The smaller (second part) is the cap for the side without any threads and snaps into place keeping the spool on the holder.
This project will noit be subject to any changes anymore and is considered complete.
(I will make changes incase there is something that is a major problem with the model.)
| Adapter.stl | 2.4MB | |
| Cap.stl | 104.2KB | |
| NOT_TESTED_SpoolHolder_v2_-_Long.stl | 2.3MB | |
| spoolHOLDER_v2.stl | 2.8MB |
