Ender 3 Filament Guide (low Friction) [2021] 3D Printer Model
The file 'Ender 3 Filament Guide (low Friction) [2021] 3D Printer Model' is (STL) file type, size is 6.0MB.
The file 'Ender 3 Filament Guide (low Friction) [2021] 3D Printer Model' is (STL) file type, size is 6.0MB.
Part-1 of a two-part build to reduce the friction of the filament reel feed into the extruder motor. This is the feeder guide wheel. Designed to be stiff rigid with a low tolerance connection to the machine. The wheel runs smoothly over the support arm to enable good feed into the printer.
The second part is for reels that have a larger inner diameter. This is found here:
https://www.thingiverse.com/thing:5167265
Hope it brings you all lots of Merry Smooth Prints this Christmas. Don't forget to upload a photo and share some <3.
Orientation was designed with y-vertical, thus may need to flip it to get the best prints.
EDIT:
I have added a tight clearance for printers that under slicer or have a loose fit.
0.15mm standard (x2)
0.075mm tight fit (x2)
| Support_Wheel_Mount_arm.STL | 2.8MB | |
| Support_Wheel_Mount_arm_tight_fit.STL | 2.1MB | |
| Support_Wheel_Mount_wheel.STL | 10.2MB |
