Ender 3 1/4″ Camera Mount 3D Printer Model
The file 'Ender 3 1/4″ Camera Mount 3D Printer Model' is (stl) file type, size is 365.2KB.
The file 'Ender 3 1/4″ Camera Mount 3D Printer Model' is (stl) file type, size is 365.2KB.
Remix of Ender Camera Mount 1/4'' by Hadancdd to improve printability. Base plate mounts to the printer using existing screws, and the camera is mounted to the arm with a 1/4" screw.
A printable 1/4" is provided, but I used one I had spare since my printer didn't like the printable one. Amazon has them and you can probably find them elsewhere easily.
Likewise, I added a printable shim, since the screw didn't tighten fully after my modifications. You could also use washers if you have them lying around.
I am using a generic Chinese webcam which I find works well thanks to its height adjust (and from the photos the same one Hadancdd is using). The sellers change their shell company frequently but I found one that should work and you can likely find them on AliExpress to save a buck. Just make sure it has a 1/4" camera mount and it will work.
Finally, this isn't necessary, but I used some graphite lube in the swivel joint, since I wanted it to move more easily.
| Base.stl | 97.1KB | |
| CamArm_Printable.stl | 526.3KB | |
| Knob.stl | 653.2KB | |
| Shim.stl | 7.9KB |
