Ender 2 Pro Fan Mount W/CR Touch Option (No Additional Hardware) 3D Printer Model
The file 'Ender 2 Pro Fan Mount W/CR Touch Option (No Additional Hardware) 3D Printer Model' is (gcode,stl) file type, size is 1.2MB.
The file 'Ender 2 Pro Fan Mount W/CR Touch Option (No Additional Hardware) 3D Printer Model' is (gcode,stl) file type, size is 1.2MB.
No additional Hardware needed! This Hot-End fan gets rid of the stock plastic cover drastically increasing visibility. Print time was about 1h 15min to 2h and fits the stock 4010 fan on the Ender 2 Pro. The three bolts needed are the same bolts that secured the stock cover (two long for the fan and one short to secure the mount to the mounting plate).
TO INSTALL:
UPDATE 01/14/2023:
CR Touch mount added to design. I do not know the X, Y, or Z offsets figured out yet so let me know if get it dialed in. In theory, they should be:
X=+30.6
Y=-12.5
I don't have the CR touch installed so let me know if you find the offsets to be different.
| CE2_Fan_Mount.gcode | 1.6MB | |
| CR_Touch_Calibration_X.stl | 166.2KB | |
| Fan_Mount.stl | 2.8MB | |
| Fan_Mount_with_CR_Touch.stl | 5.1MB |
